Technical

• Surface tolerant single component, zinc-rich primer.
• Approved for Class B Slip Coefficient.
• Versatile, easy to use, corrosion resistant primer.
• Replaces epoxy zinc. Better performance than inorganic zinc.
• Unlimited recoat time.
• Overcoatable by itself.
• Tolerates flash rusting.
• High DFT tolerance.
• 1 primer for any type of surface prep. including UHP WJ, Dry blasting,
  wet abrasive blasting, power tool cleaning, hand tool cleaning.

Technical

• Surface tolerant MIO/zinc filled primer.
• Better surface tolerance than epoxy mastic.
• Outperforms inorganic zinc primers.
• High DFT tolerance and unlimited recoatable by itself.
• Compatible with most old coatings and different alloys.
• Full or spot primer on hand and power tool cleaned,
  (wet/dry) abrasive blasted or UHP cleaned surfaces.
• versatile, easy to use, corrosion resistant primer.
• Does not require Sa 2.5 for maximum performance.
• Tolerates flash rusting.
• Recommended for immersion, splash zone and atmospheric exposure.

Technical

• Most surface tolerant primer.
• Low viscosity, penetrating sealer to replace epoxy penetrating sealers.
• Outstanding abrasion & impact resistance.
• Can be used in combination with any type of surface preparation.
• Intermediate/Topcoat in highly abrasive environments.

Technical

• M1O filled, refined coal tar MCU.
• Outperforms coal tar epoxy in all uses.
• Immerse within 30 minutes with or without the use of QuickCure in most conditions.
• Available in black or red.
• Less irritating than conventional coal tar epoxy.
• Two coat MC -Ferroguard system passes 5,000 hours prohesion testing on steel.
• On any marine, offshore, hydro, waste water or other structure exposed to salt or fresh water and sewage treatment.
• Above or below grade service direct to concrete or steel.
• Easily re-coatable and repairable.

Technical

• Universal intermediate coat.
• Coloured topcoat for interior use where there is limited UV exposure and slight ambering is acceptable.
• Aromatic topcoat to replace epoxy.
• High resistance to atmospheric chemicals.
• Best choice in salt or fresh water immersion service.
• Ideal for use over MCU primers for long term peformance in ballast tanks and cargo holds.
• Free of tar.

Technical

• Intermediate coating that provides the smoothest finish of all our intermediate products.
• Recommended for priming concrete when coloured topcoats are required.
• Excellent secondary containment concrete coating for mild chemical exposure.

Technical

• Used as an intermediate coat for new construction and full removal projects.
• High-solids aromatic intermediate for atmospheric service.
• Miomastlc contains a proprietary blend of MCU resin and MIO and has many application and performance advantages compared to epoxy mastics.
• Available as a stock item in standard grey beige.
• On any marine, offshore, hydro, waste water or other structure exposed to salt or fresh water and sewage treatment.
• Easily re-coatable and repairable.
• Ideal to use over MCU primers for long term performance in atmospheric and interior service.

Technical

• High solids intermediate coat for overcoating old coatings (incl. lead based) in atmospheric or interior service.
• Contains a proprietary blend of MIO and corrosion inhibitors.
• Available as a stock item in standard light grey.
• Adds performance to spot primed areas.
• Easily re-coatable and repairable.

Technical

• Semi-gloss aliphatic topcoat.
• Available in RAL and custom colours.
• Light stable exterior topcoat for atmospheric use.
• Applies directly to galvanised and other non-ferro substrates.

Technical

• SMIO modified, low sheen aliphatic topcoat.
• Available in dark colours.
• Recommended for overcoating old coatings.
• Very durable topcoat for atmospheric service.
• MI0 modification greatly extends coating life and allows easy overcoating for years.

Technical

• Aluminum filled topcoat.
• Very durable, abrasion and weather resistant topcoat .
• Outstanding topcoat for restoring weathered galvanized steel.

Technical

• Chemical resistant gloss topcoat.
• Best possible resistance to UV, abrasion and weathering.
• High-solids, VOC compliant coating.
• Rejuvenating colour coat for chalked or weathered painted surface.
• Chemical resistant coating for metalized surfaces, containment ponds and tanks.
• Highly abrasion-resistant coating for concrete and wood floors.
• Colour coat for fibreglass and gelcoat surfaces.

Technical

• Speeds up cure times by 80%.
• Cure time reduced to 30 minutes, depending on temperature.
• Pot life still one day when spraying.
• Increases the DFT tolerance of MCU products.
• Increases gloss.
• Adds performance.
• Increases production.

Technical

• Single-component, ambient curing, moisture-cure silicone.
• Multiple use primer/topcoat.
• Colour: Aluminium.
• High-solids, VOC-compliant coating.

• Outstanding heat resistant, corrosion resistant topcoat over MCU Zinc HH.
• High-performance, one-coat or multiple-coat thin film coating for steel and aluminium in high heat corrosive environments.
• Excellent weathering and UV resistance.
• Superior heat resistant primer for coloured Topcoat HH.

• Single-component - no catalyst mixing errors.
• Room temperature curing high heat paint.
• Can be applied in cold, damp conditions - at humidity to 99%.
• Can be applied at low temperatures.
• Best impact resistance offered in high heat market.
• Best thermal shock resistance ever offered.
• Excellent resistance to ageing, cracking, weathering and UV.
• VOC compliant.
• Exceptional all-around performance in harsh environments.
• Superior adhesion at extreme temperatures.

Technical

• Single-component, Zinc filled, ambient curing, moisture-cure silicone.
• High heat primer.
• Color: Gray.
• High-solids, VOC-compliant coating

• Outstanding heat and corrosion resistance when top coated with MCU Aluminum HH.
• High performance, one coat or multiple thin film coating for steel and aluminium in high heat corrosive environments.
• Excellent weathering and UV resistance.
• Superior heat resistant primer for MCU Aluminium or coloured Topcoat HH.

• Single-component - no catalyst mixing errors.
• Room temperature curing high heat paint.
• Can be applied in damp conditions - at humidity to 99%.
• Can be applied at low temperatures.
• Best impact resistance offered in high heat market.
• Best thermal shock resistance ever offered.
• Excellent resistance to ageing, cracking, weathering and UV.
• VOC compliant.
• Exceptional all-around performance in harsh environments.
• Superior adhesion at extreme temperatures.

• Atmospheric Service: SA 2 Commercial Blast Cleaning.
• Immersion Service: Not recommended.
• New Construction: SA 2 Commercial Blast Cleaning.
• Spot Primer: Pressure wash at 1000 bar minimum. Supplement with SSPC-SP1 Solvent Cleaning if necessary.
• Hand and Power Tool Clean to ST 2 and ST 3 on areas of corrosion.
• Existing Coatings: Not recommended.
• Weathered Galvanized: Pressure wash at 500 bar minimum. Supplement with SSPC-SP1 Solvent Cleaning if necessary.